Skydrift12 LogoSkyDrift DMA
Login
DMA Card

DMA Card Setup (Main PC)

Hardware Setup (Main PC)

🔌 1. Power Down Your Game PC

  • Completely shut down your main PC (Game PC) before inserting the DMA card.

🧩 2. Insert the DMA Card

  • Plug your DMA card into any available PCI-e slot on your Game PC.

🔗 3. Connect to 2nd PC

  • Use the included USB data cable to connect the Data Port on the DMA card to your 2nd PC.

⚙️ 4. Enter BIOS on Game PC

  • Power on your Game PC and enter BIOS/UEFI setup:
    • Usually done by pressing DEL, F2, or ESC during boot.

🚫 5. Disable Virtualization (Required)

Virtualization interferes with DMA memory access and must be disabled.

Intel CPUs:
  • VT-d
  • Intel Virtualization Tech
  • IOMMU
AMD CPUs:
  • SVM
  • IOMMU
This Is Required if your using test firmware If you want firmware that bypass this restriction you can click here.

⚠️ 6. Optional (If Available)

  • Disable NX-Bit / Execute Disable Bit (Only if listed)
  • Set PCIe Slot to Gen1 (Max compatibility)

🧱 7. Disable Memory Integrity

On your Game PC, do the following:

  1. Open Windows Security
  2. Navigate to: Device Security > Core Isolation > Core Isolation Details
  3. Turn off "Memory Integrity"
If this won’t load, it may already be disabled — no action needed.

✅ You're Done

Your DMA card is now installed and your Game PC is properly configured.

🖥️ Next Step:

It is now recommended to proceed with the 2nd PC setup.